Direct-to-wall printing · San Juan, Puerto Rico

A mural printed directly on your wall. No vinyl. No peeling.

We print art, branding and wayfinding straight onto walls, glass, brick and concrete — UV-cured and clear-coated for humidity, salt air and sun. Built for hotels, restaurants, gyms and schools that need a wall guests actually photograph.

$25 / sq ft launch rate$950 minimum jobDesign included10–20 sq ft / hr
Request a walk-through → Estimate my wall

Launch offer: one paid sample wall, 150–300 sq ft, so you can judge the finish on your own property before scoping more.

Vertical wall printer printing a large floral mural directly onto an interior wall

A vertical wall printer at work — the image is printed on the surface itself, not applied on top of it.

What we print on

If it's a surface, we can print it

No seams, no bubbles, no edges for humid air to lift. The print follows brick texture, curves and corners.

Interior wallsBrick & blockConcrete & stuccoGlassWoodMetalTileExterior walls*Signs, panels & canvas (in-shop)

*Exterior and high-traffic work gets a protective clear coat, +$5–$8 / sq ft. Floor printing is a separate service, quoted per project.

Hotel lobby in Puerto Rico with a large colorful mural behind the reception area
Hotels & resorts

Lobbies guests remember

Feature walls, ballroom and meeting branding, spa and pool art. Typical anchor wall: 300–500 sq ft.

Restaurant dining room with a large colorful mural covering the back wall
Restaurants & bars

The photo wall

A wall built for photos does your marketing for you. Typical wall: 150–250 sq ft, printed in a day or two.

Tropical botanical mural with lush green foliage in a stylish interior
Gyms · Schools · Homes

Identity at full scale

Gym motivation walls, school mascots and wayfinding, luxury home and short-term-rental feature walls. 100–400 sq ft.

Estimate your wall in 10 seconds

Launch rate $25 / sq ft. Full rate card runs $15–$35 / sq ft depending on surface, height and detail. $950 minimum applies.

200 sq ft  ·  Estimated total $5,000
At 10–20 sq ft/hr, that's roughly 10–20 print hours plus prep — most walls finish in 1–3 days on site.
Why not vinyl?

Vinyl is cheaper up front. It isn't cheaper in Puerto Rico.

Caribe Surface Printing — direct printVinyl wrap / wallpaperHand-painted mural
How it sitsPrinted into the surface — no edgesFilm applied on top — seams & edgesPaint on surface
Humidity & salt airUV-cured + clear coat; nothing to peelEdges lift, bubbles form in humidityGood, if prepped and sealed well
Typical PR price$15–$35 / sq ft$8–$25 / sq ft installedOften ~$1,500 flat for a feature wall
DesignAny photo, logo or artwork, exact colorsAny design, exact colorsDepends on the artist; revisions are slow
Speed10–20 sq ft / hrFast installDays to weeks

Typical Puerto Rico market rates, November 2026.

How it works

From photo to finished wall

1

Walk-through

We measure, photograph the wall and check the surface — free, about 30 minutes.

2

Design & proof

Your art or ours, mocked up on a photo of your actual wall before we print.

3

Prep & print

Surface prep and primer as needed, then direct UV printing at 10–20 sq ft/hr.

4

Clear coat & care

Protective coat for exterior / high-traffic walls, plus a simple care guide.

Questions

Before you ask

Will it fade in the sun or peel in humidity?

The ink is UV-cured the instant it's printed — there's no film to peel. Exterior and sun-exposed walls get a clear protective coat (+$5–$8/sq ft), which is the spec we recommend anywhere near the coast.

How long does a 200 sq ft wall take?

Roughly 10–20 print hours at 10–20 sq ft/hr, plus prep. Most single walls are finished in 1–3 days on site.

What's the minimum job?

$950. At the $25 launch rate that's about 38 sq ft — a strong accent wall, logo wall or entry feature.

Can you print my logo / a photo / my own artwork?

Yes — any digital file. Design help is included at the launch rate; we proof it on a photo of your wall first.

Do you print floors?

Floor printing uses a separate horizontal machine and is quoted per project. Tell us about the floor in the form and we'll scope it honestly.

Start here

Request a walk-through

Tell us about the wall. Your request is sent straight to Ibsen Torres at ibsent@caribesurface.com — no mail app needed, just press Send.

Wall printer beside a finished underwater dolphin mural it printed directly on the wall

The paid sample wall

150–300 sq ft at the $25 launch rate. Judge the finish on your own property — then we scope the rest.

Or pick a time right now

Live availability for a free 30-minute walk-through — Mon–Sat, 9 AM–5 PM (Puerto Rico time). The appointment lands straight on our calendar, and you'll get a confirmation email.

Calendar not loading? Open the booking page in a new tab.

Copied